Opening page…
03 / Clothes and accessories
Your transfer arrives ready to apply. Prepare the garment and follow both pressing steps. The second press is part of the process, not an optional extra.
Textile DTF is suitable for clothing, bags and fabric accessories that can withstand heat and pressure. Test one item before a batch. You receive a printed transfer on film, not the garment.
Check the garment instructions and heat tolerance before applying.
Have the garment, transfer, heat press and Teflon protection ready. Separate the designs and confirm placement before heating. When working across garment sizes, check that the same print dimensions suit each one.
Read the care label and manufacturer’s instructions. A fabric type alone does not guarantee that every finish can withstand the process. Test one representative item before making a batch, especially with an unfamiliar fabric, colour or coating.
Lay the garment flat without folds in the print area. Check whether seams, pockets, fasteners or thickness differences prevent press contact. Do not compensate by randomly increasing pressing time: resolve support and pressure first.
Use the MegaDTF settings in this guide and let the press reach operating conditions as instructed by its manufacturer. ‘High pressure’ is not the same numeric setting on every machine. Resolve uneven contact or temperature control before applying the first transfer.
Position the transfer where you want it and cover it with a protective Teflon sheet.
Press at 135 °C for 10 seconds with high pressure and Teflon protection.
Peel the film immediately after the first press.
Cover with Teflon again and press at 135 °C for another 5 seconds. Always complete this second press.
After the first press, peel immediately as instructed. Check that the artwork stays on the garment, including corners, small lettering and separate details. If any part lifts with the film, stop: do not pull harder or continue the batch.
Complete the second press with protection. Check placement, appearance and edges without pulling at the print to test adhesion. Record your settings so you can repeat the process or explain a problem to our team.
If there is a problem, keep the film and photograph the whole item and affected area. Note the material, press, temperature, both pressing times and when you peeled. This helps our team assess the process rather than guess from a photo alone.
| Situation | How to avoid it |
|---|---|
| Using instructions for a different transfer | Use the MegaDTF instructions for the supplied transfer. Another supplier’s temperature, times or peeling method may differ. |
| Skipping the final 5-second press | The second press is part of the process, even if the design looks secure after peeling. |
| Testing only the first fabric | Changing the fabric, finish or garment model requires a fresh check. Do not assume the same result on different materials. |
You can use an iron. Always protect the design with a Teflon sheet or, if unavailable, baking parchment.
Wash at 30 °C and inside out to reduce friction between the print and other garments. Follow the fabric care label if it requires gentler treatment.
Do not tumble dry or iron directly over the print. Correct application and care affect durability; we do not guarantee a fixed number of washes.
See washing and care instructions →
Prepare Textile DTF →3 ideas for your next print